HCM-5000B Masonry series block machines have a capacity of 500,000 (2,224kN) with a testing range from 1 to 100% of machine capacity, 精度为指定负载的±5%. Masonry series compression testing machines are available in two load frame configurations for testing single- or two-block masonry prisms of full-sized block up to 12" (304 mm) wide.
- Tests blocks, masonry prisms, pavers and retaining wall units
- 400,000 (2,224kN) testing range with accuracy of ±0.指示负荷的5%
- Standard configuration includes platens for testing 6" x 12" (150 x 300mm) cylinders
- Draw rod is included for safer, easier and faster changing of test platens and spacers
垂直开口- 18.375" (467mm)
水平开口- 14" (356mm)
活塞行程- 2.5" (63.5mm)
下台板,暗淡. - 13" x 16" (330 x 407毫米)
上压板,直径. - 6.5" (165mm)
2加仑(7加仑.6升)
整体宽度- 30“(762毫米)
整体深度- 23.75" (603mm)
整体高度- 63.625" (1616mm)
These heavy-duty load frames use the same proven design and manufacturing process found in all of our machines, with a wide horizontal opening and large compression platen table for easier 加载 of heavy specimens. The machine's included mounting stand also places the lower platen at a convenient working height.
这些机器是独一无二的, dual-platen system features a wear platen through-hardened to 60 HRC or greater and is designed for fast and 容易 maintenance without the need for expensive rental equipment to remove the platen, unlike the cumbersome single-plate systems used in competitive units. Changing test platens and spacers is quick, 容易, 有了拉杆就安全了, used to adjust the load frame's inside vertical working height, 并可选配托架系统, which features a heavy-duty arm mounted on the rear left corner of the load frame that pivots on two hinged joints. When the block platen is not being used, it can be conveniently stored on the bracket's arm. 包括安装支架.
Photo shows machine with Optional Platen Carrier Bracket, which is highly recommended
Optional test platens and accessories add to the versatility of the block and prism machines.
洪堡 offers several excellent controllers f或使用 with our concrete compression machines allowing you to choose the controller that best fits your application.
洪堡's HCM-5080 and HCM-5070 controllers incorporate these standard tests in their design: ASTM C39, C78, C293, C469, C496, C1019, C109/C109M和EN 12390-3. Just pick the test you want to run as you configure your test and the controller will guide you through setup from where you can proceed with your test.
手动控制器
洪堡 also offers the HCM-5090, a digital indicator f或使用 with manually-operated machines. This controller features many of the features of our automatic controllers except that it is designed f或使用 with a manually-operated pump. The HCM-5090 incorporates the same standard test setups as the automatic controllers. Just pick the test you want to run as you configure your test and the controller will guide you through setup from where you can proceed with your test.
洪堡’s HCM-5090 Controller features a 7" high-resolution, color, 触屏, 它提供了准确的, 精密机器操作. 和, 具有双通道负载输入, which allow for the control of two separate compression frames and two additional channel inputs for displacement, which allow for extensometer and compressometer testing
为了精打细算, 我们还提供i7指示器, which is an 容易-to-use digital load indicator that simultaneously displays both live load and rate of load values during a test.